Multi-Tooth Annular Cutters

Power Tools

cutter_material

cutting_diametermm

depth_of_cut

shank_diameter

shank_type

type

brand

categoryId

stockStatus

Consumables & Accessories

Kennedy

Bore diameter: 20mm. 
Overall length: 156mm.

For use with all multi-tooth cutters with 6mm bore. 

Features and Benefits
• Pilots locate into pre-drilled pilot holes ensuring positional accuracy of the cutter
• Suitable for 'blind' or 'through' pilot holes, pin will retract into cutter adaptor upon bottoming

Notes
• Short series = 77mm
• Long series = 102mm



Pilot Pins

Pilot Pin, 13-52mm x 50mm, Steel

Shank dia.: 19mm/3/4". 
Depth of cut: 50mm. 
Bore: 6mm. 
Overall length: 85mm.

Cutting edge geometry increases cutting performance and reduces cutting forces producing a solid Slug of material which is ejected when the cutter breaks through and the hole is complete. Cutters are faster, easier and are more accurate than the conventional twist drills or drill bits. 

Features and Benefits:
■ Cutters are made of super tough high speed steel (M2 grade) with 3/4" weldon shank compatible with all magnetic drills

■ Accurate, symmetrical, fine finish hole cutting capabilities

■ Reduced friction between the HSS core drill and the material

■ Time and energy savings 

Typical Applications:
■ The ideal choice for all your magnetic drilling & cutting applications. Designed for use in fabrication, construction, railways, petrochemical and any other applications when drilling ferrous metal, structural steel, plate, tubing or material that requires a fine finish hole. 

 




HSS Type Annular Mag Drill Hole Cutter Long

Multi-Tooth Cutter, Long Series, 33mm x 50mm, 8 Teeth, M2 High Speed Steel

Sizes: 14, 16, 18, 20, 22 & 24mm.
Shank diameter: 19mm/3/4". 
Depth of cut: 25mm. 
Bore: 6mm. 
Overall length: 60mm.

Cutting edge geometry increases cutting performance and reduces cutting forces producing a solid Slug of material which is ejected when the cutter breaks through and the hole is complete. Cutters are faster, easier, and more accurate than the conventional twist drills or drill bits. 

Features and Benefits
• Cutters are made of super tough high speed steel (M2 grade) with 3/4" weldon shank compatible with all magnetic drills
• Six piece cutter set complete with pilot pin
• Accurate, symmetrical, fine finish hole cutting capabilities
• Reduced friction between the HSS core drill and the material
• Time and energy savings 

HSS Type Annular Mag Drill Hole Cutter Short - 6 Piece Set 

Multi-Tooth Cutter Set, 14-24mm x 25mm, M2 High Speed Steel

Pilot Pin, 13-52mm x 25mm, Steel

Pilot Pin, 12mm x 25mm, Steel

Pilot Pin, 12mm x 50mm, Steel

For use with Magtron broaching units, drill presses, lathes etc. 
Bore diameter: 20mm. 
Overall length: 156mm.

For use with Mag Base broaching units, Piller Drills, drill presses, lathes etc. 


Morse Taper to Weldon Shank Adaptors

Adaptor No.2 Morse Taper

Adaptor No.3 Morse Taper

Unibor

The Unibor® HSS annular cutters feature unique Unibor tooth geometry for optimum tool life and cutting speed. They are able to cut ferrous metals up to 30mm deep, and are available in a range of diameters. Made from hard wearing HSS M2 material increasing the lifespan and providing the ability to cut into various materials. Ideal for use with standard 3/4" Weldon shank magnetic drill arbors.

Features and Benefits
• Made from hard wearing HSS M2 material to increase lifespan and provide the ability to cut into various materials
• Standard 3/4inch Weldon shank allows the cutters to be used with a variety of drills
• Featuring unique Unibor® geometry for optimum tool life and cutting speed

Typical Applications
• Site and construction work
• Bridge Building and repair
• Truck and vehicle fabrication
• General fabrication applications

M2HSS Annular Cutters 30mm Depth

Multi-Tooth Cutter, Short Series, 10mm x 30mm, HSS M2

Multi-Tooth Cutter, Short Series, 11mm x 30mm, HSS M2

Multi-Tooth Cutter, Short Series, 12mm x 30mm, HSS M2

The Unibor® HSS annular cutters feature unique Unibor tooth geometry for optimum tool life and cutting speed. They are able to cut ferrous metals up to 50mm deep, and are available in a range of diameters. Made from hard wearing HSS M2 material increasing the lifespan and providing the ability to cut into various materials. Ideal for use with standard 3/4" Weldon shank magnetic drill arbors.

Features and Benefits
• Made from hard wearing HSS M2 material to increase lifespan and provide the ability to cut into various materials
• Standard 3/4" Weldon shank allows the cutters to be used with a variety of drills
• Featuring unique Unibor geometry for optimum tool life and cutting speed

Typical Applications
• Site and construction work
• Bridge Building and repair
• Truck and vehicle fabrication
• General fabrication applications

Multi-Tooth Annular Cutters

Kennedy

Pilot Pin, 13-52mm x 50mm, Steel

4 Variations

Kennedy

Multi-Tooth Cutter, Long Series, 33mm x 50mm, 8 Teeth, M2 High Speed Steel

Kennedy

Multi-Tooth Cutter Set, 14-24mm x 25mm, M2 High Speed Steel

Kennedy

Pilot Pin, 13-52mm x 25mm, Steel

4 Variations

Kennedy

Pilot Pin, 12mm x 25mm, Steel

4 Variations

Kennedy

Pilot Pin, 12mm x 50mm, Steel

4 Variations

Kennedy

Adaptor No.2 Morse Taper

2 Variations

Kennedy

Adaptor No.3 Morse Taper

2 Variations

Unibor

Multi-Tooth Cutter, Short Series, 10mm x 30mm, HSS M2

42 Variations

Unibor

Multi-Tooth Cutter, Short Series, 11mm x 30mm, HSS M2

42 Variations

Unibor

Multi-Tooth Cutter, Short Series, 12mm x 30mm, HSS M2

42 Variations

Unibor

Multi-Tooth Cutter, Long Series, 13mm x 50mm, HSS M2

39 Variations

Unibor

Multi-Tooth Cutter, Short Series, 13mm x 30mm, HSS M2

42 Variations

Unibor

Multi-Tooth Cutter, Long Series, 14mm x 50mm, HSS M2

39 Variations

Unibor

Multi-Tooth Cutter, Short Series, 14mm x 30mm, HSS M2

42 Variations

Unibor

Multi-Tooth Cutter, Long Series, 15mm x 50mm, HSS M2

39 Variations

Unibor

Multi-Tooth Cutter, Short Series, 15mm x 30mm, HSS M2

42 Variations

Unibor

Multi-Tooth Cutter, Long Series, 16mm Cutting Diameter x 50mm Cutting Depth, HSS M2

39 Variations

Unibor

Multi-Tooth Cutter, Short Series, 16mm x 30mm, HSS M2

42 Variations

Unibor

Multi-Tooth Cutter, Long Series, 17mm x 50mm, HSS M2

39 Variations

Unibor

Multi-Tooth Cutter, Short Series, 17mm x 30mm, HSS M2

42 Variations

Unibor

Multi-Tooth Cutter, Long Series, 18mm x 50mm, HSS M2

39 Variations

Unibor

Multi-Tooth Cutter, Short Series, 18mm x 30mm, HSS M2

42 Variations

Unibor

Multi-Tooth Cutter, Long Series, 19mm x 50mm, HSS M2

39 Variations

Unibor

Multi-Tooth Cutter, Short Series, 19mm x 30mm, HSS M2

42 Variations

Key Information

Group Policies

© 2024 Cromwell. All rights reserved.