Throwaway Cutters

Cutting Tools

cutter_diameter

cutting_direction

flute_length

material

number_of_flutes

overall_lengthmm

shank_diameter

brand

categoryId

stockStatus

Milling

KC3 Throwaway Cutter Set

Kennedy

Contents: 
Cutting diameters 
Short Series: 1, 2, 3, 4, 5 & 6mm. 
Long Series: 2, 3, 4, 5 & 6mm.

11 piece HSS-Co 5% KC3 3* flute throwaway milling cutters set containing both short & long series cutters to cover a wide range slot drilling & end milling processes.

Features & Benefits
• 11 piece cobalt high speed steel metric set containing short and long series cutters for versatile use 
• Robust KC3 3 flute construction for use with end milling & slot drilling
• Set screw located on shank allows for securely holds cutters within adaptors or chucks to give quick & easy cutter changes
• Metric Tolerances: Diameter: Over 1.00 ~ up to 3.00. Tolerance: +0.013, -0.033, Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.020, -0.020

Contents (mm)
• Short series 1, 2, 3, 4, 5, 6 and Long series 2, 3, 4, 5, 6

Typical Applications
•  Suitable for slot drilling and end milling

HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters Set, Short/Long Series, 11 Pieces

KC3 Throwaway Cutter Set, Centre Cutting, Cobalt High Speed Steel, Uncoated, Set of 11

KC3 Milling Cutters

For high volume production. Compatible with standard automatic locking chucks and spindle adaptors (available on request).

Short series

Short Series - Metric
Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. 

Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. 
*Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes.	
Shank Diameter:  1.00 ~ 6.00 = 6.00mm, 7.00 ~ 10.00 = 10.00mm

Metric Tolerances: 
Diameter: Over 1.00 ~ up to 3.00. Tolerance: +0.013, -0.033.
Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.020, -0.020.

Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.

TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.

TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters, Weldon Shank: Short Series, Metric - Uncoated

Throwaway Cutter, Short, 1mm, Cobalt High Speed Steel, Uncoated, M35

Throwaway Cutter, Short, 2mm, Cobalt High Speed Steel, Uncoated, M35

Throwaway Cutter, Short, 3mm, Cobalt High Speed Steel, Uncoated, M35

Throwaway Cutter, Short, 4mm, Cobalt High Speed Steel, Uncoated, M35

Throwaway Cutter, Short, 5mm, Cobalt High Speed Steel, Uncoated, M35

Throwaway Cutter, Short, 6mm, Cobalt High Speed Steel, Uncoated, M35

Throwaway Cutter, Short, 8mm, Cobalt High Speed Steel, Uncoated, M35

Long Series
Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. 

Long Series - Metric.
Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. 

Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. 
*Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes.

Metric Tolerances: 
Diameter: Over 1.00 ~ up to 3.00. Tolerance: +0.013, -0.033.
Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.020, -0.020.

Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.

TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.

TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

HSS-Co 5% KC3 3* Flute Throwaway Milling Cutters, Weldon Shank: Long Series, Metric - Uncoated

Throwaway Cutters

Kennedy

KC3 Throwaway Cutter Set, Centre Cutting, Cobalt High Speed Steel, Uncoated, Set of 11

Kennedy

Throwaway Cutter, Short, 1mm, Cobalt High Speed Steel, Uncoated, M35

7 Variations

Kennedy

Throwaway Cutter, Short, 2mm, Cobalt High Speed Steel, Uncoated, M35

7 Variations

Kennedy

Throwaway Cutter, Short, 3mm, Cobalt High Speed Steel, Uncoated, M35

7 Variations

Kennedy

Throwaway Cutter, Short, 4mm, Cobalt High Speed Steel, Uncoated, M35

7 Variations

Kennedy

Throwaway Cutter, Short, 5mm, Cobalt High Speed Steel, Uncoated, M35

7 Variations

Kennedy

Throwaway Cutter, Short, 6mm, Cobalt High Speed Steel, Uncoated, M35

7 Variations

Kennedy

Throwaway Cutter, Short, 8mm, Cobalt High Speed Steel, Uncoated, M35

7 Variations

Kennedy

Throwaway Cutter, Long, 2mm, Cobalt High Speed Steel, Uncoated, M35

5 Variations

Kennedy

Throwaway Cutter, Long, 3mm, Cobalt High Speed Steel, Uncoated, M35

5 Variations

Kennedy

Throwaway Cutter, Long, 4mm, Cobalt High Speed Steel, Uncoated, M35

5 Variations

Kennedy

Throwaway Cutter, Long, 5mm, Cobalt High Speed Steel, Uncoated, M35

5 Variations

Kennedy

Throwaway Cutter, Long, 6mm, Cobalt High Speed Steel, Uncoated, M35

5 Variations

Key Information

Group Policies

© 2024 Cromwell. All rights reserved.